Skip to main content

Bearing Puller Kit

 A bearing puller kit is an essential tool to get the job done right. A set of tools includes a two-1/2 pound slide hammer, four collets, and a bar-type puller head. A safety guide is included with each set to ensure that you are as safe as possible when disassembling a bearing. A spring loaded extractor is the easiest way to remove a bearing, and it can be fitted easily to the inner ring.

Some puller sets are multi-purpose. Other pullers are specialized for one specific purpose, such as for rear axles and bearings. If you're in need of a specific kind of puller, you can purchase a general puller set. The master puller kits come with multiple sizes and types of pullers. These can save you time and money in the long run and are the best choice for most jobs.

Trax tools offers a wide range of pullers. These are designed for the removal of pilot bearings and ball bearings. Some types of these pullers have an additional feature to grip the inner race while removing the entire bearing from its shaft. Another type uses slide hammers and collets to remove the bearing from a blind housing. It is important to remember that a puller should always be purchased if you are not confident that you can install it properly.

For more information visit us on https://traxtools.com.au/




Labels:

Comments

Post a Comment

Popular posts from this blog

What is a Gear Puller Tool?

 What is a gear puller tool ? It is a power tool that has the ability to remove gear oil from the transmission or engine of your vehicle. Many people don't realize that this type of device can be used for a variety of different things besides removing the oil, such as removing the cogs in your vehicle. If you need to do some work on your vehicle and aren't sure what to do next, then one of these tools could help you out. What is a gear puller tool? A puller tool is typically used by those who are familiar with working with a standard open-end wrench set. You will find that most of these pullers are ergonomic and designed to make working with them as simple as possible. This type of puller tool will usually require that you remove the front cover of your vehicle or at least have a flat non-stick surface on the ground that you are working on. There are many different manufacturers that make this type of pulling tool. Some of these include Black and Decker, Bosch, Festool, Kohler,...
Post a Comment
Read more

How to Remove a Bearing From a Shaft

 A bearing puller is utilized to remove unwanted moving parts like pulleys, bearings or gears, which are parts that are always in constant motion. For this reason, they get worn out easily and must be repaired or replaced. Bearings and gears are two essential parts of a lathe. Therefore, it is important to get these parts right when they are being installed. To begin, a bearing puller consists of a shaft and a collar that run vertically down the shaft. This collar has a screw that fits on top of the screw that runs through the hole in the shaft. The screw guides the rope as it is pulled, and the rope itself is threaded through a series of holes. The collar's thread goes through the holes on the shaft and thus pulls the bearing tooth on and off the shaft. In order to avoid stripping of stripped threads, it is recommended that you purchase bearing pullers that use a captive screw thread. This allows for the threads on the bearing pullers, to be protected and prevents them from strip...
Post a Comment
Read more

Tips When Buying Automotive Tools in Australia

 For people in this field, having a wide collection of Automotive tools in their tool boxes is a must. There are so many tools that come and go and some may be irreplaceable. Some people buy new tools every year but there are also those who buy used tools for different projects. As much as possible one should try to get quality tools so that they last longer and also perform better. A lot of automotive tools Australia have come from Europe. So if you know how to read and find them, it will not be too hard to find what you are looking for. If you are still new in this business, you need to choose which tools you will buy depending on your needs. Make sure that you check out the price of each tool so that you won't end up spending too much money. The first thing that you need to do is to check out the automotive tools that are made in Europe. As you already know that this continent is considered to be a big exporter of these products, so you better take advantage of this fact. Europ...
Post a Comment
Read more