Skip to main content

Hydraulic Pump Sets

Hydraulic Pullers have been in use since the 1800's, but their contribution to the building work gave way to the more automated system. Hydraulic pressure is extracted from a shaft in order to move or lift objects using a pump. They are used in construction of roads, buildings, bridges, and many other places. As compared to the older mechanical methods, the hydraulic system has replaced them due to the greater advantages it offers. One of its most important characteristics is its ability to maintain constant pressure in the work area even if there is a considerable distance between the pulling object and the work surface.


There are many types of Hydraulic Pullers available in the market. Some examples are: cylinder-driven, double-ended, drum-driven, direct-vent, and indirect-vent. In case of the drum-driven type, a drum or cylinder is placed on the end of a shaft, while the double-ended one mounts on both ends of a shaft and functions as a pump. The cylinder-driven type features a pump driven by a cylinder, while the direct-vent ones function by drawing in a discharge jet of hydraulic fluid directly from the source.

Hydraulic Pullers are controlled by either electric or hydraulic motor. In addition, they can also be operated with the help of pneumatic or oil means. In a way, it can be called a dynamic machine as it requires the application of force for the exertion of a continuous period of time. This feature makes them capable of lifting objects of considerable weight. The Hydraulic Puller uses the following mechanism in order to operate:

First, the work area must be measured. The distance between the work pole and the longest part of the puller structure is called the ram point. Next, the workpiece to be lifted must be placed on the lower end of the ram point. Hydraulic fluid is then pumped into the hydraulic pullers and the workpiece is lifted into the air above the work area.

Thirdly, the work piece is guided through the hoist shaft using an electric motor. The workpiece is now guided into the upper part of the hydraulic cylinder. Lastly, the work is slowly released from the hydraulic pullers into the air above the work surface. The Hydraulic pullers are capable of lifting a weight of up to 200 tons.

While working with Hydraulic Puller Sets, you must make sure that there is a proper and sufficient amount of hydraulic fluid pumped into the system. Hydraulic Pump Sets work on three main levels namely, surface, pit, and shaft. The hydraulic pump plays a vital role in the functioning of Hydraulic Puller Sets. It ensures a steady flow of hydraulic fluid through the system thus facilitating a reliable operation of the device.

For more information visit us on https://traxtools.com.au/


Labels:

Comments

Post a Comment

Popular posts from this blog

What is a Gear Puller Tool?

 What is a gear puller tool ? It is a power tool that has the ability to remove gear oil from the transmission or engine of your vehicle. Many people don't realize that this type of device can be used for a variety of different things besides removing the oil, such as removing the cogs in your vehicle. If you need to do some work on your vehicle and aren't sure what to do next, then one of these tools could help you out. What is a gear puller tool? A puller tool is typically used by those who are familiar with working with a standard open-end wrench set. You will find that most of these pullers are ergonomic and designed to make working with them as simple as possible. This type of puller tool will usually require that you remove the front cover of your vehicle or at least have a flat non-stick surface on the ground that you are working on. There are many different manufacturers that make this type of pulling tool. Some of these include Black and Decker, Bosch, Festool, Kohler,...
Post a Comment
Read more

How to Remove a Bearing From a Shaft

 A bearing puller is utilized to remove unwanted moving parts like pulleys, bearings or gears, which are parts that are always in constant motion. For this reason, they get worn out easily and must be repaired or replaced. Bearings and gears are two essential parts of a lathe. Therefore, it is important to get these parts right when they are being installed. To begin, a bearing puller consists of a shaft and a collar that run vertically down the shaft. This collar has a screw that fits on top of the screw that runs through the hole in the shaft. The screw guides the rope as it is pulled, and the rope itself is threaded through a series of holes. The collar's thread goes through the holes on the shaft and thus pulls the bearing tooth on and off the shaft. In order to avoid stripping of stripped threads, it is recommended that you purchase bearing pullers that use a captive screw thread. This allows for the threads on the bearing pullers, to be protected and prevents them from strip...
Post a Comment
Read more

Tips When Buying Automotive Tools in Australia

 For people in this field, having a wide collection of Automotive tools in their tool boxes is a must. There are so many tools that come and go and some may be irreplaceable. Some people buy new tools every year but there are also those who buy used tools for different projects. As much as possible one should try to get quality tools so that they last longer and also perform better. A lot of automotive tools Australia have come from Europe. So if you know how to read and find them, it will not be too hard to find what you are looking for. If you are still new in this business, you need to choose which tools you will buy depending on your needs. Make sure that you check out the price of each tool so that you won't end up spending too much money. The first thing that you need to do is to check out the automotive tools that are made in Europe. As you already know that this continent is considered to be a big exporter of these products, so you better take advantage of this fact. Europ...
Post a Comment
Read more